AG Mini UK Plug and Play Pool Heat Pump for Above Ground Pools up to 10m3
- Product Literature
- Delivery & Payment
- Additional information
AG Mini 3kw UK Plug and Play Pool Summer Season Heat Pump.
Update 26th July 2021: The AG Mini are now in stock. Order now while stocks last !
The AG Mini Heat Pump is the ideal choice for heating Above Ground Pools up to 10m3 (when used with a solar cover)
With a COP value up to 5.0 our heat pumps are very efficient when transferring heat from the air to the swimming pool water. You can save as much as 80% of cost compared to an electrical heater.
The heat exchanger is made of PVC & Titanium tube, which can withstand and prolong exposure to swimming pool water.
Easy control and operation
The unit is very easy to operate: simply switch it on and set the desired pool water temperature.The system includes a micro-computer controller, allowing all operation parameters to be set. Operation status can be displayed on the controller with LED display.
AG Mini are the ideal choice for heating above ground pools up to 10 m3
Light and easy to install being plug and play with an inline RCD breaker
Supplied with stepped hosetails to take either 32mm (1.25″) or 38mm (1.5″) standard flexible pool hose
Delivers up to 2.9 Kw of heat from only 0.59Kw of electricity
This model comes with a 3 pin UK plug and RCD
Slash the cost of heating your pool using the AG Mini heat pump rather than an electric heater
They are designed for small above ground pools up to 10m3 of water (when used with a solar cover)
The AG Mini heat pumps are incredibly easy to setup for your pool.
They offer much lower running costs that using an electric pool heater.
The AG Mini unit outputs up to 2.9 kw of pool heat but only uses 0.59 kw of electricity
- New for 2021
- Dimensions – 439mm x 350mm x 300mm (height x width x depth)
- Weight 23kg
- Suitable for pools up to 10m3 of water
- Suitable for summer use eg May-Sept – requires an air temp of +10c and above to operate
- Desired water temperature can be set to be between 15c and 40c
- Simple “plug and play” heat pump
- Comes complete with 5 meter power cable, safety RCD and with either a 3 pin UK plug for use in the UK.
- 1.25″/1.5″ (32/38mm) water connections for pool hose
- 2 x hose clips included
- Can be used with an external time clock
- Requires a flow rate of approx 1.3 m3/hr or more from your pump/filter
- Eco Friendly R32 refrigerant gas
- No bypass required
- Easy to operate
- Digital control panel – simply set the pool temperature required and the AG Mini will tun on and off as required to maintain the desired pool temperature.
- High quality metal powder coated case
- Gives much lower running costs than an electric pool heater
- Titanium Heat Exchanger
- 2-Year parts warranty
Note: The AG Mini requires a pump/filter with a system flow rate of approx 1.3m3/hr or more to operate. Please check that your pump/filter is adequate before purchasing.
3. Easy to Use Digital Control Panel
The AG Mini has a touch screen easy to use display.
Simply use the up and down arrow keys to set your desired pool temperature and the AG Mini will automatically turn on and off to maintain the desired temperature
5. What size heat pump do I require for my pool?
How to Calculate Your pool Water Volume:
You can easily calculate the water volume in your pool as follows: –
To calculate the volume of a round pool, you can use the formula
Pool Volume = 3.14 x radius x radius x depth
- Measure the diameter of the pool in metres
- Half the diameter to give the radius of the pool
- Multiply 3.14 x radius x radius x pool depth
A 12′ (3.66 m) diameter round above ground pool with a depth of 0.8m
Diameter = 12′ x 0.305 = 3.66m
Radius = 3.66 / 2 = 1.83m
Volume = 3.14 x 1.83 x 1.83 x 0.8m = 8.4 m3
The AG Mini 2.9kw supports pools up to 10m3 so would be ideal for this pool, however if you live in a colder area we would always recommend you use a heat pump with a defrost system.
Pool volume = length x width x depth
6m x 4m pool, 0.8 m deep = 6 x 4 x 0.8 = 19.2 m3
Typical Pool Sizes and Volumes
8′ x 30″ Intex above Ground pool = 3.6 m3 – AG Mini OK !
10′ x 30″ Intex above Ground pool = 5.5m3 AG Mini OK !
12′ x 36″ Intex above Ground pool = 9.6 m3 – AG Mini just OK, but consider a larger model eg Sunspring 5kw
The sizing guide for an above-ground covered pool is:-
|Model||Kw||Max Pool Volume|
(Warmer areas in the UK)
|Max Pool Volume|
(Colder areas in the UK)
Absolute Max Pool Volume
(Hotter Climates – Europe)
|AG Mini 2.9 kw Heat Pump||2.9kw||10m3||8m3||12m3|
Please note that these sizes are based on summer use (May-Sep) to ensure that you maintain a good water temperature as long as you cover the pool with the solar cover for as many hours a day as possible (max 4 hours uncovered). The colder the outside air temperature (including night temperatures as this is the coldest time where you will lose most heat) the larger the heat pump size you will need (kw)
6. Additional Fittings
The AG Mini comes with two screw on hose tails that accept both 32mm (1.25″) and 38mm (1.5″) standard pool hose
You may need some of our fittings so that you can add this heat pump to your pool, so please take a look at our Hose pipe and Fittings
Or call us to get some help with these items.
Installation is very easy and straightforward.
The AG Mini is connected to your above ground pool hoses
It uses the existing pool circulation pump to pump the pool water through it.
Please see the user manual below for more information on how to install your heat pump
Using the AG Mini heat pump to heat your pool rather than an electric heater will save you money on running costs
The AG Mini only uses 0.59kw of electricity to produce up to 2.9 kw of pool heat.
If you compare this with an electric pool heater, a 3kw electric pool heater would use 3kw of electricity !
The AG Mini therefore is only less than 1/4 the running cost of an electric pool heater – saving you money!
10. Pool Hose
You may need to purchase an additional length of pool hose to connect from your heat pump to the pool
We sell both 1.5″ and 1.25″ pool hose
Please click on this link to add some to your basket – Hose and pipe fittings
The price includes FREE UK delivery.
We can ship the heat pumps to any country. Please contact us for a shipping quote.
The AG Mini heat pumps come with a 2-year warranty
- 2-years parts warranty on all components in the UK
- Warranty subject to the unit being installed in accordance with manufacturer’s instructions.
14. Technical Support
We are happy to provide technical support for all swimming pool heat pumps that we supply. Please call us and we will advise you further.
15. Product Literature
Please see the Product Literature tab at the top of the page for the user manual and brochure
Please click the links below to download pdf brochures for these products
If you need any assistance or advice as to which model would be best for your pool, please feel free to Contact Us
for more information, also see our FAQs page
All items sold in accordance with our terms and conditions
for all enquiries, please contact us at email@example.com
Please click the links below to download pdf brochures for these products
We accept all major credit and debit cards, Bank Transfer (BACS) and PayPal
For details of PayPal Credit please click here: PayPal Credit
The prices shown include FREE UK delivery for orders over £50 or £6.50 for orders under £50
We can ship to any country. Please contact us for a shipping quote.
The lead time on most items is normally on a 1-2 day delivery, subject to availability. Please call to check availability.